Sienna Maker Jacket Sewing Pattern - Closet Case

Sienna is a chic utility jacket inspired by vintage French workwear. Designed for hard-wearing use by makers and artists, it functions as both stylish outerwear and a highly practical layer for use inside the studio.

With a slightly dropped shoulder, Sienna features a crisp notched collar which can be worn buttoned at the neck with an optional snap button. It is unlined and finished with durable seams. Views A & B feature deep hip pockets, a hidden breast pocket and waist-cinching belt with D ring closure that can be worn closed, or open by looping the belt in the opposite direction; View A hits at mid thigh and View B ends at upper thigh. View C is a short chore jacket with button closure, optional sleeve pockets and a back button placket. 
This sewing pattern comes with meticulously written and easy to follow instructions, designed to give everyone beautiful results regardless of skill level.

Sewing level: Intermediate

Sizes: 0 - 20 (see our sizing chart here). 

Finished measurements: See complete final measurements here.

View A (Full length jacket)
Sizes: 0-8 = 2.75m, 10-14 = 3m, 16-20 = 3.2m
View B (Mid length jacket)
Sizes 0-20: 0-8 = 2.5m, 10-14 = 3.75m, 16-20 = 3m
View C (Cropped jacket)
Sizes 0-20: 0-8 = 1.85m, 10-14 = 2m, 16-20 = 2m

ADDITIONAL SUPPLIES

• Lightweight non-stretch fusible interfacing (Sizes 0-20: View A = 1.25m, View B = 1 yd, View C = 75cm)
• Pocket lining (View C = 25cm)
• Polyester thread (Topstitching thread optional)
• View A & B only: D rings or belt slider (1.5" / 38mm)
• View C only: Buttons or snaps - 9 x 5/8"
• Point turner and/or presser for collar
• Marking tool
• Optional: One set of snap buttons for collar
• Optional: Bias tape for finishing seams
• Optional: 5"/13cm twill tape or ribbon for hanging hook loop